During the current lapse in appropriations, EPA intends to keep the ENERGY STAR website, tools, and resources available, however they will not be updated regularly. Many services may not be available during this time.
ENERGY STAR partners sponsor rebates on certified products. Enter a zip code below to find deals near you!
Learn More About Products
FoMoCo - LJ98-10C823-A followed by one character
Description
ENERGY STAR
Partner
:
AMPURE
Product
Type
:
Level 2
Input Voltage
(V)
:
240.0
Max Nameplate Output Current
(A)
:
48
Maximum Output Power
(kW)
:
11.52
Number of
Outputs
:
1
Maximum Output Cord Length
(ft.)
:
20
Output Cord Gauge
(AWG)
:
6
Efficiency
15 A Operation Mode Test: Total Loss
(watts)
:
3.5
30 A Operation Mode Test: Total Loss
(watts)
:
2.56
4 A Operation Mode Test: Total Loss
(watts)
:
3.71
Full Current Operation Mode Test: Total Loss
(watts)
:
0.48
Idle Mode Input Power
(watts)
:
4.09
Idle Mode Power
Factor
:
0.41
Idle Mode Total Allowance
(watts)
:
22.8
No Vehicle Mode Input Power
(watts)
:
3.2
No Vehicle Mode Power
Factor
:
0.37
No Vehicle Mode Total Allowance
(watts)
:
3.6
Partial On Mode Input Power
(watts)
:
3.36
Partial On Mode Power
Factor
:
0.37
Partial On Mode Total Allowance
(watts)
:
3.6
Features
Automatic Brightness Control (ABC)
Capable?
:
No
Connected
Capable
:
Yes
Connects
Using
:
Wi-Fi
Network Connection Types
Available
:
Wi-Fi or Gigabit Ethernet
DR
Protocol
:
Open Charge Point Protocol (OCPP)
Is Broadband Internet Connection Needed for Demand
Response?
:
No
Protocols Used to Support Smart
Charging
:
OCPP (v1.6) - Communication towards Backend via WiFi
SAE J1772 – Communication towards Vehicle (via CP signal)
Network Security
Standards
:
ISO 21434;
Ford Security Specification (non-public), including:
- Bluetooth Security Spec
- Connected Wallbox Security Requirements
- Embedded System Applications Specification
- Operating System Requirements
- Vehicle to Cloud Security Specification
[You can use this information for the report if required]
A threat analysis and risk assessment (TARA) according to ISO 21434 has been performed. After the risk treatment decision, measures have been assigned, following recommendations of BSI and/or NIST.
“BSI” = „Bundesamt für Sicherheit in der Informationstechnik“; German federal office for security in Information Technology